BDS Suspension takes the late model RAM 2500 Power Wagon to the next level with 4" lift systems
Designed to maintain on-road handling while improving offroad capability with room for 37" tires. At the heart of these new systems are dual rate coil springs designed for a full 4" of lift on the power wagon along with your choice of NX2 gas or FOX 2.0 performance gas shocks for impressive ride quality and performance. The factory radius arms are repositioned using a pair of specially designed 1/4" thick drop brackets that key off the factory mounts for strength and rigidity. Steering correction comes from a forged drop pitman arm that is used in combination with a heavy duty track bar drop bracket to keep the steering in phase for predictable handling. Also supplied for the front are replacement bump stops, sway bar relocation to retain functionality of the factory electronic sway bar disconnect and brake line relocation brackets.
At 4" of lift the transfer case is indexed to allow the front driveshaft to function properly. BDS supplies a high strength indexing ring with ARP studs along with a replacement high clearance transmission crossmember and billet driveshaft extension to allow the factory driveshafts to be reinstalled with the kit. In the rear a pair of replacement HD dual rate coil springs are supplied to level the stance while providing a great ride and maintain tow capacity. These springs paired your choice of NX2 gas or FOX 2.0 performance gas shocks along with extended sway bar links, a heavy duty rear track bar bracket and all the necessary hardware rounds out this 4" lift system for the late model Power Wagon. Additionally BDS offers several accessories for this kit, click the "customize this kit" button to further enhance your kit.
Tire & Wheel Combinations
37x12.50 w/17", 18", 20"x9 and 4.5"-5" back spacing
*Trimming may be required*
Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 3